Jajaran Produk Shell Tellus
Minyak hidrolik Shell Tellus meliputi teknologi sintetis dengan keawetan ekstra yang masa pakainya bisa mencapai empat kali masa pakai standar hingga produk yang hemat biaya dan andal untuk aplikasi yang lebih sederhana.
Shell Tellus S2 M
Industrial hydraulic fluid
Shell Tellus S2 M fluids are high-performance
hydraulic fluids that use Shell’s unique patented
technology to help to provide the necessary protection
and performance in most manufacturing and many
mobile equipment operations. They resist breakdown
under heat or mechanical stress, and help to prevent
the damaging deposit formation that can decrease
the efficiency of hydraulic power systems.
Applications
Industrial hydraulic systems. With an extensive range of equipment
maker approvals and recommendations, Shell Tellus S2 M fluids are
suitable for a wide range of the hydraulic power applications found in
manufacturing and industrial environments.
Mobile hydraulic-fluid power-transmission systems. Shell Tellus S2 M
fluids can be used effectively in mobile hydraulic-power applications
such as excavators and cranes, except where significant ambient
temperature variations are encountered. For these applications, Shell
Lubricants recommends the Shell Tellus V series.
Marine hydraulic systems. Shell Tellus S2 M is suitable for
marine applications where ISO HM-category hydraulic fluids
are recommended.
Performance features and benefits
Long fluid life – maintenance saving. Shell Tellus S2 M fluids help to
extend equipment fluid-drain intervals by resisting thermal and chemical
breakdown. This helps to minimise sludge formation and provides proven
performance under the industry-standard ASTM Turbine Oil Stability Test to
offer good reliability and system cleanliness. Shell Tellus S2 M fluids also
have good stability in the presence of water, which can help to ensure
long fluid life and reduce the risk of corrosion and rusting, particularly in
moist or humid environments
Proven wear protection. Zinc-based anti-wear additives are incorporated
to enable Shell Tellus S2 M to be effective throughout the range of
operating conditions, including low-load and severe-duty high-load
conditions. Their outstanding performance in a range of piston and vane
pump tests, including Denison T6C (dry and wet versions) and Vickers
35VQ25, demonstrates how Shell Tellus S2 M fluids can help system
components to last longer.
Maintains system efficiency. Shell Tellus S2 M’s enhanced cleanliness,
filterability, water separation, air release and anti-foaming characteristics
all contribute to maintaining or enhancing the efficiency of hydraulic
systems. The unique additive system in Shell Tellus S2 M, in combination
with its superior cleanliness properties (meets the requirements of
ISO 4406 21/19/16 class ex-Shell plant filling lines), helps to reduce
the impact of contaminants on filter blocking, which extends filter life
and enables the use of finer filters for extra equipment protection.
Shell Tellus S2 M fluids are formulated for fast air release without
excessive foaming to help efficient hydraulic power transfer and
minimise the cavitation-induced oxidation that can shorten fluid life.
Specifications and approvals
Shell Tellus S2 M is approved by Denison Hydraulics HF-0, HF-1 and HF-2;
Cincinnati Machine P-68 (ISO 32), P-70 (ISO 46) and P-69 (ISO 68);
and Eaton Vickers M-2950 S and I-286 S. It is listed by Bosch Rexroth
Ref 17421-001 and RD 220-1/04.03. It meets the requirements of
ISO 11158 (HM fluids); AFNOR NF-E 48-603; ASTM 6158-05 (HM fluids);
DIN: 51524 Part 2 HLP type; and Swedish Standard SS 15 54 34 AM.
Complementary products
Equipment Lubricants
Gearboxes Shell Omala gear oils
Compressors Shell Corena compressor oils
Bearings Shell Gadus greases
CV.Surya Gemilang Mandiri Supplier,Distributor dan agen oli spesial untuk hidraulik berbagai merk seperti Shell pertamina total dupersol devas dll